11 safe tips of handheld laser welding machine
With the popularity of handheld laser welding machine, more and more customers have reported some problems and concerns in use.Today’s article will briefly outline the most practical security knowledge of 11 safe tips of handheld laser welding machine.
1. Stack the workpieces and plates in an orderly manner ，to keep the laser, the body and the surrounding environment clean, orderly, and free of grease. When equipment malfunctions, non-professionals are prohibited from disassembling, repairing or modifying the equipment.This is the most important safe tips of handheld laser welding machine.
2.When using gas cylinders, avoid crushing the welding wires to avoid leakage accidents. The use and transportation of gas cylinders should comply with gas cylinder supervision regulations. It is forbidden to explode gas cylinders in the sun or close to heat sources.
3.Keep the internal circulating water clean. Clean the water tank of the laser welding machine regularly and replace with deionized water or pure water.
4. Before starting the machine, make sure that the water level in the water tank is within the marked position. Check the water level of the water tank every week, and change the water tank as required, otherwise the equipment may not work normally or even be damaged. Clean the surface of the water tank as required, otherwise it may cause electric leakage and electric shock.
5. Do not place flammable and explosive materials on the laser light path or where the laser beam can be irradiated to avoid fire and explosion。
6. When the laser welding machine is working,please notice that the 6 safe tips of handheld laser welding machine the circuit is in a state of high voltage and strong current. It is strictly forbidden to touch the circuit components in the machine while working。
7. The laser source of the laser welding machine is the light energy radiation emitted by excitation, which is high intensity light. The laser emitted by the laser source is generally considered to have no physical damage when it is not in contact or visible; however, laser welding can generate ionizing radiation and stimulated radiation during the welding process. This induced radiation will not affect the eyes and body.it is an important safe tips of handheld laser welding machine.
Although the laser beam is small, the operator usually likes to stare at the beam of the welding machine, but if the sparks generated by cutting and welding for a long time are harmful to the eyes, it will sting. The retina is a very sensitive organ, so in the case of long-term viewing of the light source, you must wear protective glasses. A good shading system can eliminate the laser’s irritation to the eyes during work. Workers need to wear professional welding protective clothing when welding. Avoid direct or scattered laser light to cause damage.
8. Note that after using the handheld laser welding machine, the laser head must be placed properly, and do not throw it randomly to prevent the laser head from falling to the ground. Because there are many precision parts in the laser head, it is easy to be damaged once it falls to the ground. It is recommended to fix the laser head in one position after each use.
9. All welding staff must be trained of safe tips of handheld laser welding machine，before using the handheld laser welding machine. The laser welding machine can only be used after passing the training. Do not use the machine without training to avoid personal injury.
10. The hand-held laser welding machine cannot be in a small space with the traditional argon arc welding machine, or weld at the same time.This is something that most customers will ignore, but it is extremely important safe tips of handheld laser welding machine。
Handheld laser welding machines must have separate wires from argon arc welding (electric welding and other machines). When working with traditional welding machines such as argon arc welding, try to keep as far away as possible. The instantaneous current of traditional welding is relatively large, which will affect the micro motor inside the cutting head.
11. When changing the laser nozzle or laser protective lens, this is the basic safe tips of handheld laser welding machine,especially the internal collimating lens and protective lens, you must pay attention to it. It must be replaced in a clean and hygienic environment. Pay attention to washing your hands first to prevent contamination of the protective lens or focusing lens. , Even cause dust to enter the inside of the laser head, thereby burning out the optical fiber of the laser, resulting in more serious losses.
The above is what we have summarized in the process of customers using the machine，11 safe tips of handheld laser welding machine，very practical。
Dear customers, if you have any questions or suggestions during the use of the handheld laser welding machine, please contact us.
